OptoTermCable is a power adapter (120VAC/60Hz to 13.5VDC at 1.7A) and 6.5 ft (2 m) serial cable used with Opto 22's OptoTerminal-G70 and OptoTerminal-G75 color touch-screen display terminals. This cable is convenient for programming an OptoTerminal on a desk or location other than the final location where the terminal will be installed. (Typically a custom cable is used at the final installation site to match available power and equipment requirements.) Opto 22's OptoTerminal family brings a programmable, Ethernetenabled, graphics-based operator interface to any location with Opto 22 SNAP Ethernet systems, including those using SNAP PAC programmable automation controllers and SNAP-IT packaged systems. OptoTerminal mountable display terminals are used by operators to send commands to and... Less

You can TRUST Surveillent- International to ship your International items fast and securely packaged. Surveillent- International only sells BRAND NEW, FACTORY SEALED items that are IN STOCK. BUY IT NOW and take advantage of our LOW PRICES and FAST INTERNATIONAL SHIPPING. ---------- Please make sure you do your research before you buy this item. PoE injector incl. crossover function for direct connection to the PC For all MOBOTIX cameras except for M1 und M10 For the MOBOTIX media converter Mx2wir

The 600P series power supplies are designed to supply low voltage power for standalone fiber link modules. Models are available with either AC or DC outputs. FEATURES: UL listed CSA listed Compact power supplies for standalone fiber links Low voltage outputs Models with AC or DC outputs Models for North American and international applications

Item#:DSC-SWP2A12 12v 2000ma Regulated Power Supply Ac to Dc Power Adapter 2A Fully Regulated 100V-240V can be used world wide 12V DC 2000MA Switching Power Supply C enter positive 2.1mm x 5.5mm Jack Top Quality, UL Approved DC Jack tip :5.5 mm (outside dimension)x 2.1 mm (inside dimension) Center Positive Product Description This high quality AC adapter is useful for many applications. In most applications, you can use an adapter with a higher capacity. However, always select an adapter with t

Screen Display 16 x 2 Character Control Object High speed ball, general ball PTZ decode Protocol PELCO-D , PELCO-P ALEC , SAMSUNG VIDO-B01 , NEON HTSCAM HD600, TOTA KALATEL , VCLDOME REDAPPLE , SANTACHI450 SANTACHI650 , VICON Baud Rate 12000bps, 24000bps, 4800bps, 9600bps, 192bps Out Channel 2 Channel Communication Distance Max: 2400m Operation Temperature 14 to 122 (-10 to 50) Power DC 12V / 1A

The 100 Series System (surface-mount dome) is designed to install directly to a hard surface (such as a ceiling or wall) or 4-square, deep, electrical box using the optional adapter plate or standard mud rings. The base of the unit has an opening for a conduit fitting in the back and a threaded 3/4-inch conduit opening in the side. All models are designed for either 12 VDC or 24 VAC operation. They are factory set for 24 VAC operation; a simple jumper change before connecting power configures the camera for 12 VDC operation. Camera options include 1/3-inch format CCD color imager (standard or high resolution) and monochrome imager (standard resolution) with fixed focal length lenses of 2.9 mm, 3.6 mm, 6 mm, 8 mm, and 12 mm. Cameras with a varifocal lens have a 1/4-inch format high... Less

orangesrc store Features: Power ADAPTER DC12V 800mA SINGLE DC Power Adapter Output 12V DC, 800mA Input Voltage Range 100-240 VAC 60 Hz Peak Output Power 7 Watts, 10 watts surge Load Regulation ±3% over rated current: 0 - 800m Amp Output Voltage Nominal 12 VDC Current 800mA (1A) continuous, 650mA (0.65A) surge Input Connector US Output plug 5.5 x 2.1 mm barrel connector, UL E31153 Agency approvals UL, cUL, Energy Star Compliant, CE Other Registration ROHS, Energy Star Efficiency Level 4, Double