Fluke Networks LRAT-1000 Link Runner AT Network Auto-Tester is the fastest way to solve network connectivity problems. This rugged, handheld network tester takes the guesswork out of troubleshooting with its complete one-button Auto Test. Auto Test performs your required set of connectivity tests in seconds, enabling you to accurately and quickly identify and solve network problems. Key features include verifying signal and link integrity at 10/100/1G Copper, 802.1x authentication, cable wire mapping, streamlined UI and color display, full documentation of test results with storage for 10 reports, location and identification of cabling runs, and nearest switch information.

LinkUp Ethernet Tester With LCD Display The LinkUp Ethernet Tester will provide the first response for troubleshooting network connectivity problems. The unit’s LEDs provide instant basic connection status. The LCD display allows more detailed link analysis through the menu system. Auto-negotiation capabilities can be scrolled through. Power-Over-Etherne t voltages can be read. The LinkBlink test allows the link light on hubs and switches to determine wired port numbers. A data packet loopback test can find failures in pre-run cabling by sending actual data through the cables. The LinkUp case is ergonomically designed for one hand operation and its small size makes storage easy. LinkUp runs on 2 AA batteries and has an auto-power down feature to save battery life. Features: Identify... Less

This Cat 5 cable is great for wiring your Ethernet computer network. The PVC jacket bends easily and is easily removable for plug installation. Plugs are suitable for use with solid or stranded wire. The spring loaded crimp tool has cushioned plastic grips, a wire/cable cutter, and replaceable blades and crimp dies. The tester is suitable for Cat 6, Cat 5e, Cat 5, and BNC cables and has a two-piece design so that you can test installed cables. The two pieces of the tester snap together for easy transport or storage. Each half of the tester has an RJ45 and a BNC jack.

PRODUCT DESCRIPTION: Data & voice installation tool kit is a must have tool for UTP cable installation. The cable tester will tell you which wire has a problem. The modular plug crimping tool, and punch-down impact tool will allow you to fix loose plugs and connections with patch panels. The tool kit includes: Carrying Case Punch-down impact tool Punch Down Tool blade 66 Punch-Down Blade Reversible Punch or Punch-and-Cut Punch Down Tool blade 110/88 Punch-Down Blade Reversible Punch or Punch-and-Cut Modular Plug Ratcheting Crimping Tool - 3 in 1 8P8C and 6P6C UTP cable stripper/110 insertion tool 50 RJ-45 8P8C plugs - solid wire 50 RJ-12 6P6C plugs - stranded wire RJ-45 color coded strain relief boots.28 Pieces assorted colors Lan Tester with Remote for 8P8C... Less

This Cat 5 cable is great for wiring your Ethernet computer network. The PVC jacket bends easily and is easily removable for plug installation. Plugs are suitable for use with solid or stranded wire. The spring loaded crimp tool has cushioned plastic grips, a wire/cable cutter, and replaceable blades and crimp dies. The tester is suitable for Cat 6, Cat 5e, Cat 5, and BNC cables and has a two-piece design so that you can test installed cables. The two pieces of the tester snap together for easy transport or storage. Each half of the tester has an RJ45 and a BNC jack.

This Cat 5 cable is great for wiring your Ethernet computer network. The PVC jacket bends easily and is easily removable for plug installation. Plugs are suitable for use with solid or stranded wire. The spring loaded crimp tool has cushioned plastic grips, a wire/cable cutter, and replaceable blades and crimp dies. The tester is suitable for Cat 6, Cat 5e, Cat 5, and BNC cables and has a two-piece design so that you can test installed cables. The two pieces of the tester snap together for easy transport or storage. Each half of the tester has an RJ45 and a BNC jack.

New RJ45/BNC Cat5e/Cat5/Cat 6 LAN Network Cable Tester! (Click to Enlarge) €€ Description New!Cable tester for Cat 5 and BNC!Two piece transmitter/recei ver design to test installed cabling or patch cables!Standard cable wiring diagrams printed right on the transmitter unit!Transmitter and receiver snap together for transport or patch cable testing! Extremely easy to use and understand! Transmitter and receiver each have one RJ45 (8P8C) jack and one BNC jack.On/Off switch to conserve battery powe

Home Server with 2TB HDD storage, and wireless access point is the center of your digital home. Home Server with 2TB HDD is your home media server, router, wireless access point, and firewall. With Home Server you get a great product in a small form factor, heavily equipped with features. Stream music and high resolution films. With a few mouse clicks you share your photos with friends, make backup of your files and manage your downloads.

Home Server with 2TB HDD storage, is the center of your digital home. Home Server with 2TB HDD is your home media server, router, and firewall. With Home Server you get a great product in a small form factor, heavily equipped with features. Stream music and high resolution films. With a few mouse clicks you share your photos with friends, make backup of your files and manage your downloads.

Network Tester, Display Lcd, Application Ethernet Lan Troubleshooting, For Use With Nts2-monauth-opt, Nts2-voip-opt, Intellitone, Nts2-powerpack, Vireview 1, Wireview 2-6, Features Monitor And Authentication, Netprove Diagnostics, Inline Functionality, Voip Test And Troubleshoot, Poe Measurements, Intellitone Digital Signaling, Measures Lan Network Parameters, Adapter Type Usb, Connector Type Rj45, Data Safe Monitor Y, Waterproof N, Standards 802.3, 802.1x

Item: DSC-468B Multifunction (UTP/STP, RJ11, BNC) Network Cable Tester with Leather Case Feature: Multifunctional Network Cable Tester Jack: RJ45/RJ11/BNC Cable Type: UTP/STP/FTP/Coaxi al Test speed: 1 Display: LED single-end is double-coloured Battery: 6F22 9V (NOT Included) Description: Separable transmitter and receiver to test installed cabling or patch cables Standard cable wiring diagrams are printed on the transmitter unit Transmitter and receiver snap together for transport or patch cable t

This Cat 5e cable is great for wiring your Gigabit Ethernet or 100Base-T computer network. The PVC jacket bends easily and is easily removable for plug installation. Backwards compatible with Category 5 (Cat 5) cable, so you can mix this cable and Cat 5 cable in the same network. Plugs are suitable for use with solid or stranded wire. The spring loaded crimp tool has cushioned plastic grips, a wire/cable cutter, and replaceable blades and crimp dies. The tester is suitable for Cat 6, Cat 5e, Cat 5, and BNC cables and has a two-piece design so that you can test installed cables. The two pieces of the tester snap together for easy transport or storage. Each half of the tester has an RJ45 and a BNC jack.

This Cat 5e cable is great for wiring your Gigabit Ethernet or 100Base-T computer network. The PVC jacket bends easily and is easily removable for plug installation. Backwards compatible with Category 5 (Cat 5) cable, so you can mix this cable and Cat 5 cable in the same network. Plugs are suitable for use with solid or stranded wire. The spring loaded crimp tool has cushioned plastic grips, a wire/cable cutter, and replaceable blades and crimp dies. The tester is suitable for Cat 6, Cat 5e, Cat 5, and BNC cables and has a two-piece design so that you can test installed cables. The two pieces of the tester snap together for easy transport or storage. Each half of the tester has an RJ45 and a BNC jack.

This Cat 5e cable is great for wiring your Gigabit Ethernet or 100Base-T computer network. The PVC jacket bends easily and is easily removable for plug installation. Backwards compatible with Category 5 (Cat 5) cable, so you can mix this cable and Cat 5 cable in the same network. Plugs are suitable for use with solid or stranded wire. The spring loaded crimp tool has cushioned plastic grips, a wire/cable cutter, and replaceable blades and crimp dies. The tester is suitable for Cat 6, Cat 5e, Cat 5, and BNC cables and has a two-piece design so that you can test installed cables. The two pieces of the tester snap together for easy transport or storage. Each half of the tester has an RJ45 and a BNC jack.

Brand New RJ45/BNC Cat 6/Cat 5e/Cat 5 Computer Network LAN Cable Tester Cable tester for RJ-45 and BNC. With on/off switch to conserve battery power. Uses one standard 9 Volt battery (battery not included). Product Features · Separable transmitter and receiver to test installed cabling or patch cables · Standard cable wiring diagrams are printed on the transmitter unit · Transmitter and receiver snap together for transport or patch cable testing · Extremely easy to use and understand · Transmitter and receiver each have one RJ-45 jack and one BNC jack Technical Details · With on/off switch to conserve battery power

This Cat 5e cable is great for wiring your Gigabit Ethernet or 100Base-T computer network. The PVC jacket bends easily and is easily removable for plug installation. Backwards compatible with Category 5 (Cat 5) cable, so you can mix this cable and Cat 5 cable in the same network. Plugs are suitable for use with solid or stranded wire. The spring loaded crimp tool has cushioned plastic grips, a wire/cable cutter, and replaceable blades and crimp dies. The tester is suitable for Cat 6, Cat 5e, Cat 5, and BNC cables and has a two-piece design so that you can test installed cables. The two pieces of the tester snap together for easy transport or storage. Each half of the tester has an RJ45 and a BNC jack.

This Cat 5e cable is great for wiring your Gigabit Ethernet or 100Base-T computer network. The PVC jacket bends easily and is easily removable for plug installation. Backwards compatible with Category 5 (Cat 5) cable, so you can mix this cable and Cat 5 cable in the same network. Plugs are suitable for use with solid or stranded wire. The spring loaded crimp tool has cushioned plastic grips, a wire/cable cutter, and replaceable blades and crimp dies. The tester is suitable for Cat 6, Cat 5e, Cat 5, and BNC cables and has a two-piece design so that you can test installed cables. The two pieces of the tester snap together for easy transport or storage. Each half of the tester has an RJ45 and a BNC jack.

This Cat 6 cable is great for wiring your Gigabit Ethernet or 100Base-T computer network. The PVC jacket bends easily and is easily removable for plug installation. Backwards compatible with Category 5 (Cat 5) and Category 5e (Cat 5e) cable, so you can mix this cable with those cables in the same network. The Cat 6 plugs are suitable for use with solid or stranded wire. The spring loaded crimp tool has cushioned plastic grips, a wire/cable cutter, and replaceable blades and crimp dies. The tester is suitable for Cat 6, Cat 5e, Cat 5, and BNC cables and has a two-piece design so that you can test installed cables. The two pieces of the tester snap together for easy transport or storage. Each half of the tester has an RJ45 and a BNC jack.

This Cat 5e cable is great for wiring your Gigabit Ethernet or 100Base-T computer network. The PVC jacket bends easily and is easily removable for plug installation. Backwards compatible with Category 5 (Cat 5) cable, so you can mix this cable and Cat 5 cable in the same network. Plugs are suitable for use with solid or stranded wire. The spring loaded crimp tool has cushioned plastic grips, a wire/cable cutter, and replaceable blades and crimp dies. The tester is suitable for Cat 6, Cat 5e, Cat 5, and BNC cables and has a two-piece design so that you can test installed cables. The two pieces of the tester snap together for easy transport or storage. Each half of the tester has an RJ45 and a BNC jack.