All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports. Door, 20 gauge steel. Sides and top, 18 gauge steel. Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately). Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. One door furnished. May be used on front or rear. Add-A-Rack System used to combine two or more enclosures into one integral system. Shipped completely assembled.

 19" 2RU Rack Mount Cable Management Panel This cable management panel is designed to organize multiple cable paths on racks or in cabinets. Both 10-32 and 12-24 mounting screw kits are included allowing mount on either thread pattern. Dimensions: Width- 19.25" Depth- 4" Height- 3.5" (2RU) Capacity- approx 200 cables Condition : New Warranty : 1 Year

All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports. Door, 20 gauge steel. Sides and top, 18 gauge steel. Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately). Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. One door furnished. May be used on front or rear. Add-A-Rack System used to combine two or more enclosures into one integral system. Shipped completely assembled.

All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports. Door, 20 gauge steel. Sides and top, 18 gauge steel. Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately). Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. One door furnished. May be used on front or rear. Add-A-Rack System used to combine two or more enclosures into one integral system. Shipped completely assembled.

Ideal for traditional conference room decor Can accommodate dual displays up to 52'' each or a single display up to 65'' Available in blonde, mahogany or cherry oak veneer Includes sliding, rotating 12RU rack from Lowell Integrated adjustable v/c camera platform Integrated universal screen mount system 6 Port rack-mounted APC power strip/ surge protector Open back design for ventilation CREDENZA: Length- 53.75'', Depth - 23'', Height - 29.5'' CABINET DIMENSIONS: Width- 23'', Depth- 22'', Height- 24'' RACK CABINET DIMENSIONS: Width- 19'', Depth- 17'', Rack Units - 12RUs Optional additional accessory shelf available PLEASE INCLUDE SIZE AND MODEL OF SCREEN/DISPLAY WHEN ORDERING

19" 2RU Rack Mount Channel Cable Management Panel And Faceplate, Black This cable management panel is designed to organize multiple cable paths in racks or cabinets. Both 10-32 and 12-24 mounting screw kits are included allowing mount on either thread pattern. Dimensions: Width- 19.25" Depth- 4" Height- 3.5" (2RU) Capacity- approx 300 cables Color: Black Condition : New Warranty : 1 Year

All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports. Door, 20 gauge steel. Sides and top, 18 gauge steel. Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately). Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. One door furnished. May be used on front or rear. Add-A-Rack System used to combine two or more enclosures into one integral system. Shipped completely assembled.

All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports. Door, 20 gauge steel. Sides and top, 18 gauge steel. Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately). Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. One door furnished. May be used on front or rear. Add-A-Rack System used to combine two or more enclosures into one integral system. Shipped completely assembled.

Features: Anodized aluminum extrusion top trim.All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports.Door, 20 gauge steel.Sides and top, 18 gauge steel.Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately) Accommodates 19" wide E.I.A. panels.Bottom pierced for RC-7758 casters.1.109 inch diameter knockout holes in base.1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. Readily removable rear door.Shipped completely assembled.

Gruber 19" 2RU Rack Mount Cable Management Panel This cable management panel is designed to organize multiple cable paths on racks or in cabinets. Both 10-32 and 12-24 mounting screw kits are included allowing mount on either thread pattern. Dimensions: Width- 19.25" Depth- 4" Height- 3.5" (2RU) Capacity- approx 200 cables Condition : New Warranty : 1 Year

Features: Sturdy and durable steel construction - Mounting rails - 14 ga., other parts 18 ga.Finished complete with ventilated tempered glass front door, locking rear door, removable sidesEIA 310 Compliant for 19" rack-mount equipmentTwo pairs of fully adjustable panel mounting rails included. The panel mounting rails include unique notch at each "U" point to allow for rapid equipment location identificationTop mount fan box installed. Two fans for 23" depth, four fans for 31" depthIncludes ventilated shelves (one shelf in the 24U high cabinet, two shelves in the 40U and 45U cabinets) Includes Installed CastersLarge cutout in base. Cutout comes covered by 2.5" deep metal cover plates that allow for adjustable opening providing as much or as little open space for cable accessTwo (2)... Less

Features: All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports.Door, 20 gauge steel. Sides and top, 18 gauge steel.Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately) Accommodates 19" wide E.I.A. panels.Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components.One door furnished. May be used on front or rear.Add-A-Rack System used to combine two or more enclosures into one integral system.Shipped completely assembled.

Features: Anodized aluminum extrusion top trim.All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports.Door, 20 gauge steel.Sides and top, 18 gauge steel.Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately) Accommodates 19" wide E.I.A. panels.Bottom pierced for RC-7758 casters.1.109 inch diameter knockout holes in base.1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. Readily removable rear door.Shipped completely assembled.

Features: All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports.Door, 20 gauge steel. Sides and top, 18 gauge steel.Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately) Accommodates 19" wide E.I.A. panels.Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components.One door furnished. May be used on front or rear.Add-A-Rack System used to combine two or more enclosures into one integral system.Shipped completely assembled.

Metro s/s flavor-hold 1/2-height 1-section heated cabinet this heated cabinet from metro has a stainless steel interior and removable slide racks making it easy to keep clean. the low center of gravity makes transport easy. a convenient kick latch to hold the cabinet in place allows hands-free opening. aluminum exterior and s/s interior capacity: (9) 18" x 26" pans height: 37" width: 27-1/4" depth: 30-3/4" weight: 128 lbs slide racks magnetic latch analog thermometer kick-latch nsf, ul listed energy star rated 900 watts, 120 v, 8 amp, 5-15p 4 casters lockable door 1-year warranty model #: tc90b 835564

Features: Anodized aluminum extrusion top trim.All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports.Door, 20 gauge steel.Sides and top, 18 gauge steel.Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately) Accommodates 19" wide E.I.A. panels.Bottom pierced for RC-7758 casters.1.109 inch diameter knockout holes in base.1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. Readily removable rear door.Shipped completely assembled.

Features: Anodized aluminum extrusion top trim.All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports.Door, 20 gauge steel.Sides and top, 18 gauge steel.Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately) Accommodates 19" wide E.I.A. panels.Bottom pierced for RC-7758 casters.1.109 inch diameter knockout holes in base.1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. Readily removable rear door.Shipped completely assembled.

Features: All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports.Door, 20 gauge steel. Sides and top, 18 gauge steel.Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately) Accommodates 19" wide E.I.A. panels.Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components.One door furnished. May be used on front or rear.Add-A-Rack System used to combine two or more enclosures into one integral system.Shipped completely assembled.

All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports. Door, 20 gauge steel. Sides and top, 18 gauge steel. Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately). Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. One door furnished. May be used on front or rear. Add-A-Rack System used to combine two or more enclosures into one integral system. Shipped completely assembled.

Features: Anodized aluminum extrusion top trim.All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports.Door, 20 gauge steel.Sides and top, 18 gauge steel.Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately) Accommodates 19" wide E.I.A. panels.Bottom pierced for RC-7758 casters.1.109 inch diameter knockout holes in base.1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. Readily removable rear door.Shipped completely assembled.

All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports. Door, 20 gauge steel. Sides and top, 18 gauge steel. Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately). Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. One door furnished. May be used on front or rear. Add-A-Rack System used to combine two or more enclosures into one integral system. Shipped completely assembled.

All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports. Door, 20 gauge steel. Sides and top, 18 gauge steel. Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately). Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. One door furnished. May be used on front or rear. Add-A-Rack System used to combine two or more enclosures into one integral system. Shipped completely assembled.

All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports. Door, 20 gauge steel. Sides and top, 18 gauge steel. Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately). Bottom pierced for RC-7758 casters. 1.109 inch diameter knockout holes in base. 1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. One door furnished. May be used on front or rear. Add-A-Rack System used to combine two or more enclosures into one integral system. Shipped completely assembled.

Features: Anodized aluminum extrusion top trim.All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports.Door, 20 gauge steel.Sides and top, 18 gauge steel.Adjustable front and rear panel mounting rails tapped lb 10-32 on E.I.A. universal spacing. (use lb 7346 screws - order separately) Accommodates 19" wide E.I.A. panels.Bottom pierced for RC-7758 casters.1.109 inch diameter knockout holes in base.1200lb equipment load capacity. Interiors are accessible from front and rear for easy installation and maintenance of components. Readily removable rear door.Shipped completely assembled.

Streamline your serving process with the Delfield SAHRT2-S 79.74 cu. ft. two section solid door roll thru heated holding cabinet! This premium roll-thru holding cabinet allows you to load or retrieve two 28 1/2" x 27 1/4" x 72" pan racks from either side. And thanks to its stainless steel exterior and heavy gauge aluminum interior, you can be sure this unit will reliably serve your establishment&apo s;s needs for years to come. A powerful, helical-shaped heating element maintains food safe holding temperatures between 120 and 200 degrees Fahrenheit, while high-speed blowers provide optimum airflow to heat the inside of the cabinet. An externally mounted digital thermometer clearly displays the temperature so that you can adjust it with the microprocessor controls. It also has an alarm to... Less

Single faced tables that provide a fully equipped science center for any number from two to eight students. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard with drawers. Clear chemical resistant UV finish. Single face two student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students... Less

Model CP-UC is a very aggressive and universal cooling and venting unit. It can be used in cabinets, behind TVs, or for various rack applications. It features six top-quality fans that are mounted using special mounting hardware which eliminates noise caused by normal fan vibrations. The unit operates on DC voltage and by adjusting the voltage, the unit can be run silently or more aggressively depending on the application. The fans can also be reversed and the unit oriented to blow air either upward or downward. This unit is ideal for a variety of applications that require aggressive but quiet cooling. This unit includes a power supply.